Polycom VSX 7000 Video Conference Instructions


Placing a video call with the Polycom Video Conference Unit is easy, you can either dial a conference number direct or use the address book. When you walk into the room, make sure that the TV monitor is switched on. Pick up the Polycom remote control and the system will go from sleep mode to active.


You’ll see the main “Place a Call” screen. Here you can dial a unit or video conference.

To Make a Call

1. Dial the 4 digit number of the video conference or video unit you would like to connect with
2. Hit the green CALL button

To Make a Call with the Video Directory

1. Hit the green DIRECTORY button on the top right of the remote
2. Scroll down to the video address you would like to call
3. Press the green CALL button


To Hangup from a Call

1. Hit the red END CALL button on the top right of the remote

To Adjust the Camera while in a Call

1. Use the red ARROW KEYS at the top middle of the remote to move the camera
2. Use the blue ZOOM KEYS on the left center of the remote to zoom in and out

To Return to the Main Home Screen

1. Hit the red HOME button on the top left of the remote

To Mute Your Mic

1. Hit the orange MUTE button in the middle of the remote